Wireless Control Prison Jammer

Product Introduction

Waterproof high power wireless control jamming system AAT-PJW-6C, is developed specially for prison and other large, wireless control prison Jammer sensitive facilities, such as military installation and government compounds. It is upgraded from our prison jamming system AAT-PJW-6C . The jamming system can be controlled remotely with activation and deactivation of the system. It is carried out only by using internet or Ethernet throght the centeral computer.

Wireless control Prison Jammer AAT-PJW-6C is constructed inside a special metal enclosure, incorporating efficient "smart active" cooling system self protection jammer with incoming air filters, which enable the system to operate 365 days/24 Hours/ 7 days continuously even in hot weather. Its secure design ensures that the prison inmates and unauthorized prison personnel cannot tamper with the safe and continuous operation of the system.

Product Features
1. Jamming frequency and Output power are adjustable via 433mhz/135mhz wireless control ,LAN remote control or Internet remote control, Any frequency channel within one module can be selected to be blocked.

2. shielding range: radius 120 ~ 500 meters (-75dBm, outdoor open environment, depending on the surrounding base station distance);

3 Types of shielded signals: 4G, 3G (LTE/TD/WCDMA/CDMA2000), GSM (2G), CDMA (2G), DCS (1900M); 4G LET, 5G

4, network RJ45 remote control function, can be convenient wired, or wireless networking (wireless 433M or 135M transmission);

5. Each modular can be on/off and work in separately.

6. Wireless control Prison Jammer support each band power adjustable.

7. Wireless control Prison Jammer With a near-end network monitoring server, it can remotely monitor the parameter information of all the equipment in the entire prison at the same time, including the working status, frequency, power, temperature, voltage, current and other parameters of the module inside the equipment, and has the whole machine failure, open door state, position movement, standing wave open circuit alarm, module failure including low power, overtemperature, overvoltage, overload, standing wave alarm, etc.

Application scope:

Prisions and other large sensitive location such as military or gorermental compounds. It can also use in Oil and Gas strage Facilities and fields, Security Service, Military Units, Secret Services, Museums, Border Patrol and Drug Enforcement, Customs.ect.

Technical parameters:

Directional plane antenna 3, port output antenna, 2:

Network topology diagram:

Refer to the software interface diagram

Covering direction installation sketch:

Covering direction: cover according to the direction of the red arrow, and then adjust the Angle appropriately,(the specific covering effect should be determined according to the site installation and debugging);

In engineering applications, the host and antenna of the screen are completely waterproof and can be installed directly in outdoor environments:

1. Select directional antenna (plate) according to site needs;

2, in order to achieve the best shielding effect, it is recommended to ensure that there is no base station within 300 meters around the installation site;

3, can be installed by the roof of the building, external walls or light poles;